td5 dash in to a 200 tdi strating problem

· 4 · 1439

0 Members and 1 Guest are viewing this topic.

*

fireblade

  • *****
  • Posts: 351
  • Name: mike walker
td5 dash in to a 200 tdi strating problem
« on: November 23, 2012, 10:03:53 PM »
hi all
 done this conversion
 i think i have it all sussed now with the help of a few on
 here and arcives
 but the prob i am having just now is
 turn ignition on all seems ok but it wont send signal to start engine
 
i have bridged the relay and turn key sends signal
 
what have i forgotten or missed
 regards
 mike
 
ps hope you can understand above
mike
edinburgh

*

cooheed10

  • *
  • Posts: 19
  • what do you mean a woman in the picture???
Re: td5 dash in to a 200 tdi strating problem
« Reply #1 on: November 24, 2012, 07:55:18 PM »
Hi Mike,

when you replaced dash did you replace steering column,ignition etc. If not then you must first check the solenoid feed from the
ignition switch, if the feed is there then test at the relay in crank position before proceeding to starter.
The connection at starter are bad for corroding and not making a contact.

hope this helps

Colin
CMEC 4X4 and Recovery

Earls Rd
Grangemouth
07581244489

*

fireblade

  • *****
  • Posts: 351
  • Name: mike walker
Re: td5 dash in to a 200 tdi strating problem
« Reply #2 on: November 24, 2012, 11:14:52 PM »
thanks coohead but got it sorted now
#it was the green alar box that shoukld be behind the
dash
so tried the 1 from my disco all sound now
SO NOW LOOKING FOR A GREEN ALARM BOX


mike
edinburgh

*

Sooty

  • *****
  • Posts: 278
  • been there winched that
  • Name: mike robertson
Re: td5 dash in to a 200 tdi strating problem
« Reply #3 on: November 25, 2012, 11:10:15 AM »
if you earth the orange/black wire that earths the starter relay, i cant see any other need for the 10as box as fitted to the td5s's with your conversion
Started out with nothing,
Still have most of it left